MRi-10/100/16/RSR

16 Port 19inch Rackmount Smart switch

This Smart 10/100 switch is ideal for growing your network and adding network management features without the cost and complexity of a Cisco network.

The MRI-10/100/16/RSR rack-mount switch delivers wire speed switching with Broadcast Rate Limiting to forward your packets in the most reliable fashion to your network. Sixteen 10/100 ports wire up your workstations, while the two mini GBIC ports allow future expansion to alternate transmission media like fiber-optic and giga-uplink.

It features an integrated console port to configure the switch via Telnet/HyperTerm, making it easy to manage the 16 ports and 2 trunking groups. It includes aging and address learning to minimise data transfer errors and Data Flow Control to help prevent packet collisions. Features include Quality of Service, MAC address learning, packet filtering, automatic MDI/MDI-X crossover detection, so you dont have to worry about the cable type. No matter how intensive your network demands, this 16 port 10/100 switch from MRi has the speed, flexibility, and reliability that you can depend on.

Features

• LED display Real-time traffic status to monitor and diagnose the network
• Features store and forward mode with wire speed filtering and forwarding rates
• Full/half duplex capability on each TX port. Total bandwidth up to 200mbps per port
• Broadcast storm control
• Automatic mdi/MDIX crossover for 100 BASE TX and 10 BASE T ports
• Supports flow control mechanism to ensure zero packet loss
• Supports VLAN up to 16 groups
• DB25 connector for port configuration and monitoring
• Optional fibre module

Specifications

• FCC Class B (DoC) Regulatory approval
• All ports support Auto-negotiation capability to detect and determine the transmission
• Speeds between 10/100Mbps and Half/Full-duplex mode
• Full wire speed store and forward technology instantly eliminates bad packets
• Support IEEE 802.3x flow control for Full duplex and back pressure flow control for half duplex to prevent the overflow of data
• All ports support Auto MDI/MDI-x to facilitate installation and troubleshooting
• CE, C Tick, and RoHS Compliance
• Provides 8M buffer memory
• Provides 8K MAC address entries
• Provides full wire speed switching performance
• Operates at maximum packet filtering and forwarding rates (10Mbps: 14,880 pps & 100Mbps: 148,810 pps)
• Star topology of Ethernet system
• Supports flow control mechanism to ensure zero packet loss, Uses back pressure for half-duplex operation, and IEEE802.3x for full-duplex
• Supports packet length up to 1536 bytes
• Prevent HOL blocking
• Supports CoS up to 2 queues per egress port and uses tag and port based methods
• IEEE 802.1p Priority tagging
• Uses IEEE 802.1Q Virtual LAN Standards
• Operate Temperature: 0 ?Ž ~ 45 ?Ž
• Storage Temperature: -5 ?Ž ~ 50 ?Ž
• Operate Humidity: 10% ~ 90% (non-condensing)
• Power: 100-240 VAC, 50 ~ 60 Hz
• Provides 6.5Gbps aggregation bandwidth
• Supports Store-and-Forward forwarding scheme
• Supports broadcast storm control
• Supports Trunk function up to 4 trunk port can be defined
• Uses IEEE 802.3ad Port Trunking Standards
• 16 10/100Mbps auto-negotiation MDI/MDI-X RJ-45 port Interface
• One optional fiber module in 1 port SC/ST or 2-port MTRJ mode
• One DB-9 RS-232 connector for switch configuration
• Supports VLAN up to 28 groups