MRI-SATA2/2R
PCI 2.3 2-port SATA II Host Adapter with RAID 0, 1, 0+1 & JBOD
This is one of the most cost effective solutions for users wanting to get additional SATA support and advanced RAID for desktop systems.
The MRI-SATA2/2R brings server like features right into your desktop experience. Whether you want increased performance for gaming or a solid backup for your data, this card grants you the most adaptable cost effective solution. Fully supportive of compliant SATA II technologies, you enjoy backward compatibility, and can utilise the advanced Raid 0, 1, 0+1 capabilities.
Stock : End of Line
Buy Now
This host adapter utilises PCI 2.3 standards, resulting in lower power consumption, whilst reducing your system overheads with its advanced Native Command Queuing (NCQ) and 256-byte FIFOs. Not only is it supported in Vista but it can also host drives above the 137Gb barrier experienced on other systems.
Features
- Supports JBOD (Just a Bunch Of Disks) for expanded customisability!
- Hot-plug capability
- Supports Native Command Queuing (NCQ)
- 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
- Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives
- Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to multiple drives
- RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring
- Supports bootable drive
- Low Profile PCI form factor
- Supports two independent Serial ATA channels
- Two Pin headers on board for LED connection
Specifications
- FCC Class B (DoC) Regulatory approval
- Supports specific BIOS and driver for RAID level 0 (Striping), RAID level 1 (Mirroring), RAID level 10 (Striping and Mirroring) functions and Just a Bunch Of Disks
- Supports various makes of large capacity Serial ATA (II) hard disks and backward compatible
- Windows 98SE or later Support
- Features independant 256-byte FIFO buffers per channel for increased host read and write speeds
- Compliant with PCI Specification, revision 2.3
- Low Profile PCI form factor bracket available
- Fully compliant with Serial ATA 1.0a and Serial ATA II Extensions to Serial ATA 1.0a Specifications revision 1.1
- RoHS Compliant
- Supports 64bit / 32bit Windows Vista
- 32 bit, 33/66MHz fully compliant PCI host interface
