MRI-PCIA/133/R

PCI 2.2 Dual port Parallel ATA (IDE) controller

Add more storage to your PC with an Ultra ATA/133 drive controller card from MRi. This card features 2 IDE ports for data transfer rates up to 133MBps

The MRI-PCIA/133/R can act as the primary boot device and replace built-in IDE ports, or provide an additional 2 high-speed ports to the system. Designed to perform with high-speed IDE/133 drives, it also supports 100/66/33MBps hard drives, CD-ROMS, CDRW drives, and other ATA peripherals.

The MRI-PCIA/133/R auto-detects drives types and fine tunes to the best performance for each Ultra ATA channel. It breaks the 137GB barrier to support various types of large capacity hard disk drives.

Features

• 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
• Supports bootable drive
• Low Profile PCI form factor
• 2x IDE 40-pin connectors
• Full backward support for Ultra ATA/100/66/33 standards
• On-board flash BIOS for future upgrade
• Supports Ultra DMA (0-6) and Multi-word DMA mode (0-2), and PIO mode (0-4)
• CRC error-checking provides data verification and achieves flawless data transactions
• Coexists with on-board IDE controller and allows you connect up to 4 IDE devices
• Supports ATAPI devices including CD-ROM and CD-R/RW drives, and zip drives
• Provides 2 independent Ultra ATA channels (built-in 256 Bytes FIFOs per channel) for faster data transfer
• Full support ACPI (Advanced Configuration and Power Interface) for advanced system power management

Specifications

• FCC Class B (DoC) Regulatory approval
• Silicon Image Chipset
• Windows 98SE or later Support
• RoHS Compliant
• Compliant with PCI Specification, revision 2.2
• Supports 64bit / 32bit Windows Vista
• Supports Spread Spectrum in receiver
• Compliant with ATA/ATAPI-6 specifications
• Compliant with UDMA6 ATA/133 specification
• Supports PCI 33 MHz with 32-bit data
• Achieves burst data transfer rates up to 133MB/sec
• Support scatter/gather, multi-threaded, multi-tasking and automatic FIFO threshold selection